Burkard Hand Microapplicator Five different drop sizes may be selected by sliding a single selector control knob. Depressing the control knob permits free rotation of the main drum. Drop sizes range from 0.25 microlitres when fitted with all-glass syringes. 단일 선별 기 통제 손잡이를 미끄러지게 함으로써 5가지 다른 물방울 크기가 선택됩니다. 통제 손잡이를 누르면 주 드럼 (main drum)이 자유로운 회전을 합니다. 전면-유리 주사기(all-glass syringes) 장착 시 물방울 크기는 0.25 마이크로 리터로부터 변동합니다. Construction and Equipment Details The Applicator is constructed from non-ferrous materials with all components either hard anodised or electro-plated in satin chrome finish. Drop sizes normally available are 0.25, 0.5, 1, 2 and 5 microlitres and selection is quick and simple. Ten times the volumes shown can be obtained by the use of 10 ml all glass syringes The BURKARD all-glass syringe is clamped or released by turning a single knurled screw and the 10 ml syringes are supplied complete with adapter for mounting direct into the cover tube. The mounting of the applicator enables it to be clamped in any position during use. 이 기구(Applicator)는 비 철물(non-ferrous materials)로 제조되었으며, 모든 부품은 Satin chrome 마무리 칠하기와 함께 Hard Anodised 또는, 전자-도금이 되어있습니다. 보통 이용 가능한 물방울 크기는 0.25, 0.5, 1.2 및 5 마이크로 리터이며, 선택은 신속하고 간단합니다. 10배 분량은 10㎖ 완전 유리 주사기를 사용하여 입수 될 수 있습니다. BURKARD 전면 유리 주사기는 단일의 마디 스크류(Knurled screw)를 돌림으로써 죄거나 풀 수 있으며, 10㎖주사기는 커버 튜브로 직접 탑재를 위하여 아답터(Adapter)와 함께 완비되어 제공됩니다. Applicator의 탑재는 사용하는 동안 어떤 위치에 그것이 죄어 질 수 있게 합니다.
아래 장비는 표준 품으로 제공됩니다. - One BURKARD all-glass syringe.
- Two hypodermic needles.
General Specification Maximum delivery capacity with Burkard 1 ml syringe | 500 µl | Overall height | 9 cm (3½ inches) | Overall width | 12.7 cm (5 inches) | Overall length | 15.2 cm (6 inches) | Base plate dimensions | 10 x 15 cm (4 x 6 inches) | Nett weight | 1.35 kg (3 lb) | Gross weight | 1.92 kg (4.2 lb) | Extra Equipment: 10 ml all-glass syringe complete with stainless steel mounting sleeve. |
|