Potter spray tower(약제 살포 탑)유기체에 직접 분무 또는, 잔류 필름(막)으로 응용 시 화학물질의 생물학적 효과 연구에 알맞습니다. 이것의 설계는 Rothamsted 실험 연구소, Harpenden, Herts, England로부터의 보다 최근 개발 품과 조화를 이룹니다. 0 ~2Kg/㎠의 압력 게이지는 표준 장치로써 장착됩니다. Suitable for studying the biological effects of chemicals both when applied as a direct spray on the organisms or as a residual film. This design incorporates more recent developments from Rothamsted Experimental Station, Harpenden, Herts, England, including the following: quickly detachable atomisers pneumatically operated spray table and all air controls mounted on attached instrument panels. A 0-2 kg/cm² pressure gauge is fitted as standard equipment. Construction and Equipment Details 프 레 임 : 호감이 가는 빛 자가 색 완성 및 내구성 있는 구조에 있어 사출 알류미늄 합금으로 제조됨 분무테이블 : 내적으로 고도의 끝손질 정밀 제조 알류미늄 합금 회전 판, 매트 외부 표면으로 중간 플레포옴에 있는 세 개의 나사로 중앙에 위치한다. 노 즐 : 중간 및 마무리 분무를 위해 표준 장치로써 쌍으로 제공됩니다. 스테인레스 jet와 픽업튜브와 함께 정확한 스프레이 형성을 제공하는 근소 허용 오차로 제조되었습니다. 수평 및 분무 튜브 위 집중화를 위해 완전 조정 가능 조립 분무테이블 : 공기 실린더의 피스톤 이내 높이 조정 가능하며, 스프레이 튜브 밑에 시료 접시 배치를 위하여 시험 플레포옴에 편심기가 부착됨 공 기 압 : ON/OFF스위치와 배출 밸브에 의해 통제되는 입력 연결 장치를 통하여 1.5 ~2kg/㎠의 일정한 공급. 미세 조정은 기구의 왼편에 위치한 민감 니들벨브로 이루어지며, 이 니들벨브는 압력 게이지나, 또는 압력계에서 직접 눈금을 읽을 수 있다. 이 압력은 에어 잭과 노즐헤드를 동시에 작동시킨다. 압 력 계 : 준비는, 요구 시 압력계의 사용을 수용하기 위해 기구의 뒷면에서 이루어진다. 기구하단 부의 수평 스크류 다리는 기포수준기와 합동으로 손쉬운 수평조정을 제공한다. Frame: | Manufactured from extruded Aluminium Alloy section in pleasing self colour finish of light and durable construction. | Spray Table: | Precision made Aluminium Alloy spinning with high finish internally and matt external surfaces, positioned centrally by three screws mounted on the intermediate platform. | Nozzles: | Units supplied in pairs as standard equipment for Intermediate and Final spraying. Manufactured to close tolerance giving an accurate spray formation, with stainless steel jet and pick-up tube. Fully adjustable assembly for level and centralising over the spray tube. | Spray Table: | Adjustable for height within the piston of the air cylinder and fitted with eccentrics to the test platform for positioning the specimen dish beneath the spray tube. | Air Pressure: | Constant supply of 1.5 - 2 kg/cm2 through the input connection controlled by an on/off switch and exhaust valve. Fine adjustment is made by a sensitive needle valve on the left hand side of the instrument giving direct reading on the pressure gauge, or manometer (which is supplied as an extra). This pressure operates the air jack and nozzle head simultaneously. | Manometer: | Provision is made at the rear of the instrument to accommodate the use of a manometer if required. Level Four screwed feet in the base of the instrument provides easy levelling in conjunction with the spirit level on the intermediate platform. |
| | | |